CM-24 & CMT-24   

Conformability
While others claim greater conformability, the CMT-243 brake block provides twice the compressibility and a greater surface contact area than other leading brake linings. This results in a significant improvement in brake performance and reliability.

Transfer Film Technology
Rather than using traditional abrasive particles, CMT-243 is formulated with a unique combination of materials which continuously provide a layer of transfer film on the surfaces of the brake block and drum. This creates a more stable friction co-efficient at all temperatures, leading to greatly reduced wear and noise.

Thermal Capacity
Only CMT-243 provides consistently lower average temperature throughout the braking process while dampening out temperature spikes, thus providing more consistent braking. Specifically designed for the high-temperature, severe-duty applications found in coach and transit, refuse removal and construction. CMT-243 provides longer life cycle, fewer re-lines, and most importantly, reduced maintenance costs when compared to any other brake linings on the market today.

Large North American Refuse Fleet – “In one of our most severe applications, CM-243 enabled us to triple our lining and drum life and eliminate tire blowouts.”

Large Canadian Transit – “In extensive tests over 16 months, CMT-243 is increasing lining and drum life an average of 87% without noise or any other driver or rider complaints.”

Midwest Transit – “On our low-floor tests, CMT-243 more than doubled the lining life of the O.E. brake lining with no noise or other service problems.” Brake Pro products are application specific. This means you can select the brake formula matched to your use that will combine optimum performance with minimum cost per mile. Listed below are some applications for CM-243 and CMT-243




HOME *COMPANY PROFILE *FRICTION PRODUCTS *TECHNICAL BULLETINS *AFFILIATIONS *CONTACT US

Brake Parts Inc. 4400 Prime Parkway McHenry, IL 60050
815-363-9000 Fax 815-363-9030
Customer Service 1-800-211-1426
Copyright ©2007 Affinia Group Inc. All Rights Reserved /Subject to change without notice